Nerian,
I wanted to ask quick if there were any recommendations as to what resolution you should calibrate the camera at? The system we have runs at 800x320 and I wasn't sure if it might be more accurate to calibrate at the highest resolution possible and then modify the yaml file to be instead for 800x320 (i.e can you get a better model of the lens that way).
-Kieran
Calibration Resolution
-
- Posts: 12
- Joined: Sun Jun 09, 2019 2:15 am
-
- Posts: 120
- Joined: Mon Mar 25, 2019 1:12 pm
Re: Calibration Resolution
Hi Kieran,
it's not so easy to modify the YAML file, as you would have to convert both, the projection center and the measured focal length. I recommend calibrating at the resolution you are going to use. Please check the reprojection error that you get. For smaller image resolutions like the one you are using, a reprojection error below 0.1 pixels indicates a good calibration.
Regards,
Konstantin
it's not so easy to modify the YAML file, as you would have to convert both, the projection center and the measured focal length. I recommend calibrating at the resolution you are going to use. Please check the reprojection error that you get. For smaller image resolutions like the one you are using, a reprojection error below 0.1 pixels indicates a good calibration.
Regards,
Konstantin