SceneScan Pro as active stereo

Post Reply
HumamHelfawi
Posts: 6
Joined: Thu May 02, 2019 12:29 pm

SceneScan Pro as active stereo

Post by HumamHelfawi »

Hi,

Is it possible to use SceneScan Pro as an Active Stereo (e.g. by combination with IR pattern emitter)?

Thanks!
k.schauwecker
Posts: 118
Joined: Mon Mar 25, 2019 1:12 pm

Re: SceneScan Pro as active stereo

Post by k.schauwecker »

Yes this works very well. We have made good experiences with structured light projectors by Effilux (their EFFI-Lase projector). Also, consumer video projectors work well. Another option are laser pattern projectors based on diffraction, but they are usually much dimmer than an LED-based projector.

Pattern projection helps if you want to measure objects with very little visible texture. If the surface has at least some texture, it should also work well without projection.
HumamHelfawi
Posts: 6
Joined: Thu May 02, 2019 12:29 pm

Re: SceneScan Pro as active stereo

Post by HumamHelfawi »

Thank you very much for your time!
Post Reply