Compatible Cameras

Post Reply
HumamHelfawi
Posts: 6
Joined: Thu May 02, 2019 12:29 pm

Compatible Cameras

Post by HumamHelfawi »

Hi,

What spesefiction should be available in the cameras that can be connected to SceneScan Pro ?
For example, how can I know if this Camera https://www.ximea.com/en/products/appli ... mu9pm-mbrd (after connecting it to USB cable) is compatible ?

Thank you very much!
k.schauwecker
Posts: 118
Joined: Mon Mar 25, 2019 1:12 pm

Re: Compatible Cameras

Post by k.schauwecker »

Hi!

the cameras must support the USB3 Vision standard. This does not seem to be the case for the linked Ximea cameras. Ximea supports USB3 Vision with their higher-end board-level cameras. For example this one: https://www.ximea.com/en/products/usb-31-gen-1-with-sony-cmos-xic/board-level-cameras-usb-31/sony-imx174-usb3-mono-board-level-camera

For the lower-end range, the Basler dart cameras are a good board-level option (in particular the daA1600-60um). Also, The Imaging Source has compatible board-level cameras.
HumamHelfawi
Posts: 6
Joined: Thu May 02, 2019 12:29 pm

Re: Compatible Cameras

Post by HumamHelfawi »

Thank you very much for reply!
Post Reply