Changelog for SceneScan / SceneScan Pro Firmware

4.0.0 (2019-08-14)

  • Support for image resolutions up to 6 megapixels
  • New edge-depending adjustment of SGM penalties p1 and p2
  • Allow finer adjustment of image resolution
  • Fixed image size selection for network image input
  • Added support to flip input images in Y direction
  • Preliminary support for upcoming Karmin3 cameras
  • Improved detection of wrong camera order during calibration
  • Fixed minor dropped frame issue due to auto exposure with certain cameras
  • Updated USB3 Vision support

3.3.0 (2019-06-19)

  • Network protocol changes (not backward compatible to older versions)
  • Support for parameter enumeration API
  • Fixed image size selection for network cameras

3.2.0 (2019-04-01)

  • Support for Bayer pattern input images
  • Allow multiple iterations of speckle filter
  • Improved auto exposure algorithm
  • Moved more white balance settings to the simple camera settings page
  • Fixed frame rate problem with some Karmin2 cameras
  • Fixed compatibility for some Basler ace color cameras

3.1.2 (2019-01-30)

  • Fixed bug that causes auto-exposure to stop adjusting camera settings
  • Fixed possible corrupted output when replaying example sequence
  • Updated several internal software components

3.1.1 (2019-01-16)

  • Fixed possible hang for preview window in web interface

3.1.0 (2019-01-15)

  • Allow setting of parameters through new network protocol
  • Allow smaller disparity range down to 32 pixels
  • Support for new hardware revision

3.0.0 (2018-12-03)

  • Added support for RGB color image processing (limited to SceneScan Pro)
  • Allow 64 pixel disparity range for SceneScan Pro
  • Slightly increased maximum image size for SceneScan Pro
  • Minor bugfixes

2.0.2 (2018-07-27)

  • Fixed possible single-pixel artifacts near image edges
  • Changed default color coding to rainbow in webinterface

2.0.1 (2018-07-16)

  • Improved robustness of firmware update process

2.0.0 (2018-06-07)

  • New network protocol (not backwards compatible; requires software release >= 6.0.0)
  • Discovery of devices on the local network
  • Re-transmission of UPD packets in case of packet loss

1.3.0 (2018-03-29)

  • Significant reduction of erroneous artifacts for low-disparity and low-texture image regions

1.2.0 (2018-03-01)

  • New PTP time synchronization
  • Improvements for The Imaging Source cameras
  • Camera auto settings now allow a maximum gain
  • Camera calibration now only stores valid frames
  • Added automatic swapping of cameras during calibration
  • USB stability improvements
  • Performance improvements

1.1.0 (2018-02-01)

  • New auto exposure feature
  • Support for new pixel formats: Mono12, Mono12Packed
  • Performance improvements
  • Stability improvements

1.0.0 (2017-11-15)

  • Initial release